Connect with us


What is Bootrec Fixboot Access is Denied in Windows 10 & How to Fix it?



Are you constantly irritated by the Fix Bootrec Fixboot Access is denied message that you receive everything? No worries, this error can easily be fixed. When a booting failure is experienced by the users, they often run the bootrec/fixboot command when they get this error. When the command doesn’t run properly, you may get the “bootrec fixboot access is denied” error.

Fix Bootrec Fixboot Access is Denied in Windows 10

Fix Bootrec Fixboot Access is Denied in Windows 10

If you too are facing the same problem, this article has got you covered. Let us discuss a few possible solutions to get the problem fixed. 

How Does the Error Occur

If your fixboot access is denied on Windows 10, probably you must have tried to execute the bootrec command. Bootrec command is possibly one of the best ways to get several startup issues fixed, such as BSOD, missing of bootmgr, etc. It follows the procedure of re-establishing the BSD file to get the error resolved. 

However, the error can occur because of various reasons. Three major causes are listed below: 

  • A damaged or corrupted BCD and windows file is a major reason behind this error. 
  • If your desktop has a startup setting that you want to remove or avoid, but it is processed by the Boot manager by using the fixboot/bootrec command in the CMD, then it will show an error message stating, “the Access is denied”. 
  • One of the most probable reasons behind it is the windows version of the system. If your system has been updated to either Windows 10 1707 or Windows 10 1709, then the risk of getting this error is very high. The above-stated two versions of Windows are not suitable for the fixboot/bootrec command. 

The error may sometimes appear when you try to solve any kind of startup problem by running the fixboot or the bootrec command. Keep in mind that the issue is generally because of the risk partition, boot manager, or the BCD file problem. 

Solutions to Resolve “Bootrec Fixboot Access is Denied” Error

  • Name the Hidden Boot Partition Present on the Drive

Before you move to the solution, ensure that the HDD doesn’t have any reserved partition or on the SSD drives on your laptop or the computer. If you don’t know anything about it, we recommend you get some more information about it from google. If it exists, you cannot repair it because it doesn’t have any name. 

Even after this, you can provide a name with the help of Diskpart and get it repaired effortlessly. 

  • Disable Fast Boot in BIOS

When you disable the fast boot in BIOS, this process enables you to deal efficiently with the access denied error. It further empowers you with a considerable speed of the booting process. 

A Bonus Tip!

If you have tried both the above-listed solutions, but are still not able to find a solution to get rid of the error, we have a bonus tip for you. Follow the below-listed steps, and it will help you solve the issue. You will have to repair the bootloader. 

Step 1: Use a Windows 10 Installation Disc to boot your PC, and then press on any key to continue. 

Step2: Click on “Repair your computer”> “Troubleshoot” > “Advanced Options” > “Command Prompt”

Step 3: Enter the diskpart in the command prompt. 

Step 4: You will have to type the following command: 

  • List disk 
  • Sel disk 0
  • List vol
  • Sel Vol 4
  • Assign Letter = N
  • Exit

Step 5: Type N (assigned drive letter and press enter). 

Step 6: Format EFI Partition with the command “N: /FS: FAT32”. 

Step 7: Type “bcdboot C:\ windows /s N: /f UEFI” and press “Enter”. It will repair your bootloader. 

Why So Many People Face This Issue For A Variety of Reasons? 

The issue of “fixboot/bootrec access is denied” on Windows 10 usually occurs due to a variety of reasons. Most of them occur because of the Windows 10 installation media. The problem usually occurs because of the media installation that is not compatible with Windows 10.

If you use the Windows 10 1703 installation media files, the bootrec or the fixboot command is expected to run correctly without any errors. Also, a corrupted or missing BCD file is the cause behind the issue, we have talked about this content.

Karan Bhardwaj, Founder of Geeknism worked as a Digital Marketer since 2012 and has expertise in Tech Niche. You can follow him on Facebook and Twitter.